3:28:07 PM.
Address: /showpage.php~file=06010100.htm.html
Title: Section 101  •  Size: 3732

Go to Table of Contents
Go to next section: 102


101.1 Title. These regulations shall be known as the Uniform Building Code, may be cited as such and will be referred to herein as ``this code.''

101.2 Purpose. The purpose of this code is to provide minimum standards to safeguard life or limb, health, property and public welfare by regulating and controlling the design, construction, quality of materials, use and occupancy, location and maintenance of all buildings and structures within this jurisdiction and certain equipment specifically regulated herein.

The purpose of this code is not to create or otherwise establish or designate any particular class or group of persons who will or should be especially protected or benefited by the terms of this code.

101.3 Scope. The provisions of this code shall apply to the construction, alteration, moving,demolition, repair, maintenance and use of any building or structure within this jurisdiction, except work located primarily in a public way, public utility towers and poles, mechanical equipment not specifically regulated in this code, and hydraulic flood control structures.

For additions, alterations, moving and maintenance of buildings and structures, see Chapter 34. For temporary buildings and structures see Section 3103 and Appendix Chapter 31.

Where, in any specific case, different sections of this code specify different materials, methods of construction or other requirements, the most restrictive shall govern. Where there is a conflict between a general requirement and a specific requirement, the specific requirement shall be applicable.

Wherever in this code reference is made to the appendix, the provisions in the appendix shall not apply unless specifically adopted.

Go to Table of Contents
Go to next section: 102

Commercial Asbuilts: BOMA Asbuilt | Definitions | Projects | Project Types | FAQ | Useful links
Residential Asbuilts: Projects | Asbuilt Services | FAQ
Contact | Copyright | Privacy Policy | Site Map | News