3:28:33 PM.
Address: /showpage.php~file=06260400.htm.html
Title: Section 2604  •  Size: 2264

Go to Table of Contents
Go to previous section: 2603

SECTION 2604 - PLASTIC VENEER

When used within a building, plastic veneer shall comply with the interior finish requirements of Chapter 8. Exterior plastic veneer shall be of approved plastics materials as defined in Chapter 2 and shall comply with the following:

1. Plastic veneer shall not be attached to any exterior wall to a height greater than 50 feet (15 240 mm) above grade.

2. Sections of plastic veneer shall not exceed 300 square feet (27.9 ) in area and shall be separated by a minimum of 4 feet (1219 mm) vertically.

EXCEPTION: The area and separation requirements and the smoke-density limitation are not applicable to plastic veneer applied to Type V-N buildings, provided the walls are not required to have a fire-resistive rating.

Go to Table of Contents
Go to previous section: 2603
Commercial Asbuilts: BOMA Asbuilt | Definitions | Projects | Project Types | FAQ | Useful links
Residential Asbuilts: Projects | Asbuilt Services | FAQ
Contact | Copyright | Privacy Policy | Site Map | News